4
BA-en-3021-1912_R23ATR
Dear customer
The R23ATR point charging bar is a robust bar for the point or edge charg-
ing of non-conductive surfaces. The charging bar is used wherever static
electrical charges may be used beneficially in production processes, e.g.
in edge fixation during film production.
The point charging bar is mounted directly behind the flat film of the
extruder. The charging bars are used to charge both film edges and to fix
the edges to the chill roll. This arrangement prevents neck-in.
The R23ATR/__ point charging bar operates with a maximum high voltage
of 30 kV DC, depending on the design the R23ATR11operates with a
maximum high voltage of 60 kV DC; it is also suitable for use in higher
ambient temperatures.
The advantage of the point charging bar is that it can be operated with
either one, two or three exchangeable emission tips. The geometry of the
emission tips is freely selectable, offering the best possible adaption to
your production processes. The bars can be operated horizontally, verti-
cally and in very confined spaces.
Please read these instructions carefully before starting the unit. This will
help you prevent personal injuries and damage to property.
Simply give us a call if you have any suggestions, proposals or ideas for
improvements. We greatly appreciate the feedback from the users of our
appliances.
