_________________________________________________________________________________
_________________________________________________________________________________
Universal Network Terminal TAU-32M.IP 3
–
Enhanced CLI interface supported functional;
–
iftable SNMP MIB2 support.
Version 2.14.0
07.02.2017
Added:
–
PPTP tunnel support;
–
IPSec tunnel support;
–
Firmware update art certain time (timed);
–
Configuration update at certain time;
–
Filtrations on MAC addresses;
–
configuration of acoustic signals parameters
–
Dial plan profiles;
–
Call forward to a local subscriber is fixed;
–
Echo delay time configuration;
–
T2 timer configuration;
–
Individual Diffserv for RTP per port;
–
Diffserv for RTP for subscriber profile;
–
Rx AGC
–
Tx AGC
–
DNS failure is fixed.
Version 2.13.1
15.07.2015
Added:
–
Ability to configure MTU;
–
Ability to configure ports to get access via Telnet, SSH, HTTPS;
–
Ability to switch to redundant proxy only by INVITE request type.
Version 2.13
28 January 2015
Added:
–
Incorrect RTP/SAVP processing is fixed;
–
Call decline by 500 SIP INFO request reply receiving is fixed;
–
Misuse of accept header in SIP replies is fixed;
–
SIP headers display via Web interface issues are fixed;
–
Automatic username and password fields in Web interface filling is fixed;
–
Russified Web interface;
–
Symbol '%' inputting in username, hot number, alt number, cf_no_answer,
cf_busy, cf_unconditional, cf_out_of_service restriction;
–
Response for transition to a redundant proxy is changed from 408 to 505;
–
Expanding of Username and Password fields to 50 characters in SIP profile;
–
MWI service for SIP;
–
Ability to change the way of static/dynamic address obtaining in factory default
configuration;
–
Ability to change factory default MAC address;
–
Updated files of time zones for NTP;
–
Prior channel through-connecting when calling to a call group;
–
Maximum amount of simultaneous Web interface users is increased to four;
–
SIP domain transmission to request URI;
–
Application of Wait answer timeout for incoming calls;
–
Creation of DHCP option 82.
Version 2.12
18.09.2014
Added:
–
alert-info header processing;
–
Multihoming mode support;
–
Work behind NAT (STUN, PublicIP) support;
–
CgPN/CdPN modification support with incoming calls;
–
Optional depth of RURI check with incoming calls;
–
Configuration and firmware update via FTP/HTTP/HTTPS support;
–
Local log;
–
Configurable daylight saving time support;
–
Configuring the Speed/Duplex modes of switch ports.
Version 1.17
20.06.2014
Added:
–
SNMP. New blocking cause support (Receiver offhook);
–
WEB. Regexp dialplan modofocation:
–
Processing of the ABCD symbols in regexp routing plan;
–
Ability to replace S-timer by L-timer for variable symbol amount rules in regexp
routing plan;
–
SNMP, WEB Increasing of the Call group amount up to 32;
–
Increasing of the FXO call group amount up to 32;
–
H323 processing of the status enquiry message.
