____________________________________________________________________________________
____________________________________________________________________________________
TAU-4M.IP Subscriber gateway
73
–
DND (Do not Disturb)
-
service allows subscriber temporarily restrict all incoming calls.
Activation Code
- code for service enabling;
Deactivation Code
- code for service disabling;
Check code
- code for service activity control;
Deactivation and check codes filled automatically based on activation code.
To apply a new configuration and store settings into the non-volatile memory, click the
'Apply' button.
To
discard changes click the
'Cancel'
button.
2.6.3.9
'Cadence' submenu
In the
'Cadence'
submenu you can set alternative cadence signal according to Alert-Info header in
incoming Invite. Cadence value for every call signal sets as a sequence of rolling impulse and pause lengths
divided by symbol ',' or ';'. Impulse/pause length value sets in milliseconds and must be multiple to 100. Min
impulse/pause length is 200 ms, max - 8000 ms.
To assign cadence to Alert-Info header value in incoming Invite you should enable the
'Process Alert-Info
header'
flag in assigned SIP profile and set signal name in the 'Signal Name' field (e.g. Example-cadence) in
cadence settings. Cadence will playback to line if incoming Invite will content Alert-Info header with value
<http://127.0.0.1/Example-cadence>.
If cadence will not be found by Alert-Info header, there will be attempt to finf the cadence by caller
number. If this cadence is not found the standart signal with cadence '1000', '4000' output.
To edit the specified signal click on assigned link in
'Cadence name'
column.
To add a signal click the
'Add'
button and execute following settings:
Cadence name
- cadence name;
Cadence
- length of the ringing voltage sending to a subscriber set and length of the pause
between call signals, both values should be multiple to 100 ms, min value is 200 ms, max is 8000
ms;
To apply a new configuration and store settings into the non-volatile memory, click the
'Apply' button.
To
discard changes click the
'Cancel'
button.
