____________________________________________________________________________________
____________________________________________________________________________________
TAU-4M.IP Subscriber gateway
89
For DHCP, you may specify the required value for Option 60.
Alternative Vendor ID (Option 60)
– when selected, the device transmits Vendor ID (Option 60) in
Option 60 DHCP messages (Vendor class ID). If the field is empty, Option 60 will not be
transmitted in DHCP messages.
If the
Alternative Vendor ID (Option 60)
checkbox is not selected, the default value will be
transmitted in Option 60 in the following format:
[VENDOR:
vendor
][DEVICE:
device
type
][HW:
hardware
version
]
[SN:
serial
number
][WAN:
WAN
interface
МАС
address
][LAN:
LAN
interface
MAC
address
][VERSION:
firmware version
]
Example:
[VENDOR:Eltex][DEVICE:TAU-4M.IP][HW:1.0][SN:VI23000118][WAN:A8:F9:4B:03:2A:D0]
[LAN:02:20:80:a8:f9:4b][VERSION:#2.3.0]
DHCP Relay Agent information (Option 82)
– when selected, you can add to DHCP request the
following data:
–
Agent circuit ID (option 82)
– allows you to add suboption 1 - Agent Circuit ID;
–
Agent remote ID (Option 82)
– allows you to add suboption 2 - Agent Remote ID into
DHCP query.
The list of DHCP options used on each network interface (Internet, VoIP, Management) can
be set manually. You will find the setup information in the Appendix B.
To apply a new configuration and store settings into the non-volatile memory, click the
'Apply' button.
To
discard changes click the
'Cancel'
button.
