____________________________________________________________________________________
____________________________________________________________________________________
TAU-4M.IP Subscriber gateway
15
2
DEVICE MANAGEMENT VIA WEB CONFIGURATOR
2.1
Getting started
In order to start the operation, you should connect to the device via LAN interface using a web browser:
1.
Open a web browser (hypertext document viewer).
2.
Enter the device IP address in the browser address bar.
Factory default IP address: 192.168.1.1, subnet mask: 255.255.255.0
When the device is successfully detected, username and password request page will be shown in the
browser window.
3.
Enter your username into ‘Login’ and password into ‘Password’ field.
4.
Click the ‘Log in’ button. The quick configuration menu will be shown in the browser window, see
Figure 6.
2.2
Changing users
There are three user types for the device:
admin
,
user
and
viewer
.
Admin
(
administrator
, default
password:
password
) has the full access to the device: read/write any settings, full device status monitoring.
User
(
non-privileged user
, default password:
user
) may configure PPPoE in order to connect to the Internet,
may not access the device status monitoring.
Viewer
(
spectator
, default password: viewer) may only view full
device configuration without editing privileges; may access full device status monitoring.
When you click the
Logout
button, the current user session will be terminated; login window will be
displayed:
Factory settings: login:
admin
, password:
password
.
