____________________________________________________________________________________
____________________________________________________________________________________
84
VoIP subscriber gateways
IMS monitoring
IMS monitoring shows the state (active or inactive) of some services on the subscriber line provided that
the remote control from IMS server is enabled for this line (IP Multimedia Subsystem).
–
IMS management
– shows whether the subscriber line service remote control from IMS server is
enabled;
–
Three-party conference
–
shows whether the 'Three-party conference' service activation command
is received from IMS server;
–
Call hold
–
shows whether the 'Call hold' service activation command is received from IMS server;
–
Call waiting
–
shows whether the 'Call waiting' service activation command is received from IMS
server;
–
Hotline
–
shows whether the 'Hotline' service activation command is received from IMS server;
–
Hotline number
–
shows phone number of
‘
Hot line
’
service activation command from IMS server;
–
Hotline timeout, sec
–
shows the dialing timeout for the 'Hotline' service in the activation
command from IMS server;
–
Call transfer
–
shows whether the ‘Call transfer’ service activation command is received from IMS
server.
4.2.9
‘
Call History
’
submenu
The device RAM may store up to 20 000 records for performed calls. If the record number exceeds 20 000,
the oldest records (at the top of the table) will be removed, and new ones will be added at the end of the file.
Log statistics will not be collected, when the history size is zero.
Click
‘Change
call history settings
’
to switch to the
‘PBX/Call
History’
section of subscriber port settings
(For detailed parameter configuration description, see Section
3.1.4.10
).
For mandatory cleaning a history, click
‘Clean
history’
button.
Call history saving
To save history file on local PC, click ‘
Download call history file
’ button.
Call history view
Click ‘View call history’ to switch to a call log
: