WB-15-W. User manual
28
•
•
•
•
Start IP Address, End IP Address
– configuring a pool of addresses that can be issued to clients
DNS
– address of the DNS server that is passed to the client in the corresponding option. For the clients to
work correctly on the Internet, the IP address of the device should be indicated as a DNS server;
Lease Time
– time after which the client will send a request to extend the lease of the issued address.
To apply a new configuration and save setting to non-volatile memory, press «Apply». Press «Cancel» to discard
the changes.
Static address mapping
Click 'Add' to add static addresses and specify the MAC address and IP address of the client. When connecting to
the Wi-Fi or Ethernet interfaces of the device, the client with the specified MAC address will be given the specified
IP address.
4.7.1 The «Access» submenu
In the «Access» submenu, you can configure access to the device via the web interface, Telnet, SSH, NETCONF*
and SNMP.
To enable access to the device via the web interface via HTTP protocol, set the flag next to «WEB». In the
window that appears, it is possible to change the HTTP port (by default, 80). The range of acceptable values
of ports, in addition to the default, from 1025 to 65535 inclusive;
Please note that the address pool for issuing to clients must be on the same subnet as the device. A
DHCP server issues IP addresses to clients on a LAN subnet, and in this case, the IP address of the device
is a gateway for redirecting client requests to the WAN, that is, it performs the function of masquerading.
