WB-2P-LR5. User manual
10
2.5 Light indication
The light indication panel of WB-2P-LR5 is shown below.
WB-2P-LR5 light indication panel
The current state of the device is shown with the help of light indicators located on the back panel of WB-2P-LR5.
The list of indicators and their description is shown in the table below.
Table 2 – Description of rear panel LED indicators
Indicator
Indicator's state
Description
Power
– power and
operation status indicator
solid green
the device power supply is enabled, normal operation
solid orange
the device is loaded but IP address is not received via
DHCP
solid red
the device is loading
LAN
– LAN interface
indicator
solid green (10, 100
Mbps)/
solid orange (1000
Mbps)
the channel between LAN interface of WB-2P-LR5 and
connected device is active
flashes
packet data transmission between LAN interface of
WB-2P-LR5 and connected device
WLAN
– received signal
strength indicator (RSSI)
solid red
the device is connected to a base station. The base
station signal level is more than -94 dBm
solid orange
the device is connected to a base station. The base
station signal level is more than -80 dBm
solid green
the device is connected to a base station. The base
station signal level is more than -70 dBm