WB-2P-LR5. User manual
18
1.
2.
4.3 Applying configuration and discarding changes
Applying configuration
The visual indication of the settings applying is realized in the web interface.
The visual indication of the settings applying:
Image
State description
After pressing «Apply», the process of settings saving to device memory is
launched. This is indicated by the
icon in the tab name and on the Apply
button.
If the setting are saved successfully, the
icon will be displayed next to the
tab name and on «Apply» button.
If any parameter value have been set incorrectly, the error notification with
description will be displayed after pressing «Apply» button. The
mark will be
displayed next to the tab name and on «Apply» button.
The 'Apply' button in the menu
.
Discarding changes
The button for discarding changes appears as follows:
.
Press «Apply» to save configuration to flash memory and apply new settings. All the settings come
into operation without device rebooting.
You can discard changes only before pressing «Apply» button. If you press «Apply» button, all the
changed parameters will be applyed and saved to device memory. You will not be able to return to
previous configuration after pressing «Apply».
