WB-2P-LR5. User manual
36
•
•
•
•
•
•
•
•
•
•
•
Wireless bridge mode
WAN
Hostname
– a name of the network device;
Device mode
– a mode of device connection;
Priority – select prioritization means. Defines a field based on which traffic transmitted to the radio
interface will be distributed among WMM queues:
DSCP
– enables analization of priority from the DSCP field of IP packet header;
802.1p
– enables analization of priority from the CoS (Class of Service) field of tagged packets.
Protocol
– defines operation mode of the interface through which the connection of the device to service
provider network will be performed:
Static
– operation mode where IP address and all the necessary parameters for WAN interface are
assigned statically. If «Static» is selected, the following parameters will be available to set:
WAN IP
– set IP address of WAN interface of the device in service provider network;
Netmask
– set subnet mask of device's WAN interface in service provider network;
Default Gateway
– address, to which a packet will be transmitted in case the route has not been
found in the route table;
DHCP
– operation mode, when IP address, subnet mask, DNS server address, default gateway and
other parameters required for operation are obtained from DHCP server automatically. Before
obtaining the parameters via DHCP, the access to the device is implemented via address set in IP
