WB-2P-LR5. User manual
39
•
•
•
•
•
•
•
Advanced settings:
Fragmentation Threshold
– frame fragmentation threshold, bytes. The parameter takes values 256-2346, by
default – 2346.
RTS Threshold
– after what quantity of bytes the Request to Send will be sent. Decreasing of the
parameter's value might improve access point operation when there are a lot of clients connected. However,
decreasing of the parameter's value will reduce general bandwidth of wireless network. The parameter
takes values from 0 to 2347, by default – 2347.
Beacon Interval, ms
– beacon frames transmission period. The frames are sent to detect access points. The
parameter takes values from 20 to 2000 ms, by default – 100 ms.
Aggregation
– enable support for AMPDU/AMSDU.
Short Guard interval
– support for shortened guard interval. 400 ns interval is used (instead of 800 ns).
STBC
– Soace-Time Block Coding method dedicated to improve data transmission reliability. When
checked, the device transmits one data flow through several antennas. When unchecked, the device does
not transmit one data flow through several antennas.
Coexistence 20/40 MHz
– automatic bandwidth changing when environment is loaded.
For wireless bridge operation, radiointerface parameters should be configured identically on all the
devices.
