WB-2P-LR5. User manual
41
•
•
•
•
•
•
•
DHCP server settings:
Enable
– when cheked, a local DHCP server is enabled, otherwise the server is disabled;
Start IP address
– the initiate address of the IP addresses pool;
Pool size
– the number of addresses in the pool;
Lease time (min)
–
set the maximum time range for using an IP address assigned by DHCP server, lease
time is set in minutes.
To apply a new configuration and store settings into the non-volatile memory, click the '
Apply' button.
To discard
changes click the
Cancel
button.
Static leases
To add a new static binding, click the
Add
button and fill in the following fields:
Name –
lease name
MAC address
–
specify a static MAC address. It is assigned in XX:XX:XX:XX:XX:XX format;
IP-address
–
set static IP address for the specified MAC address.
Configuring of static leases is helpful when you need that the certain computer always obtains certain IP address.
Press
«Apply»
to add IP address to the list of static IP addresses for DHCP server. To discard changes click the
Cancel
button.
To delete an address from the list, select the corresponding checkbox and press «
Remove
».
5.2.4 The «MAC address Management» submenu
In the MAC address Management submenu, you may set MAC address of the device's WAN interface.
When you try to change the starting address of the DHCP pool to an address from a different subnet with
respect to the subnet of the LAN interface, the pool is automatically set in accordance with the specified
local subnet.