WB-2P-LR5. User manual
55
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Select types of messages to be output in Networkd Log:
Error
– check to collect «Error» type messages;
Warnings
–
check to collect
«Warning»
type messages;
Debug
– check to collect debug messages;
Info
– check to collect information messages;
Configd Log
Log output
– log messages output direction:
Disabled
– the output is disabled;
Syslog
– messages are output to remote server or local file via syslog protocol (for protocol
configuration, see below);
Console
– messages are output to the device console (requires connection via COM port adapter);
Telnet
– messages are output to the telnet session; create telnet protocol connection first.
Select types of messages to be output in Configd Log:
Error
– check to collect «Error» type messages;
Warnings
–
check to collect
«Warning»
type messages;
Debug
– check to collect debug messages;
Info
– check to collect information messages.
Syslog settings
If there is at least a single log (Networkd Log or Configd Log) configured for Syslog output, you should enable
Syslog agent that will intercept debug messages and send them to a remote server or save them to a local file in
Syslog format.
Enable
– when selected, user Syslog agent is launched;
Mode
– Syslog agent operation mode:
Server
– log information will be sent to a remote Syslog server;
Local file
– log information will be saved to a local file
;
Server and file
– log information will be sent to a remote Syslog server and saved to a local file.
According to Syslog agent mode, the following settings might be avaliable:
Syslog server address
– Syslog server IP address or domain name (required for 'Server', 'Server and file'
modes);
Syslog server port
– port for Syslog server incoming messages (default value is 514; required for 'Server',
'Server and file' modes);
File name
– name of the file to store log in Syslog format (required for 'Local file', 'Server and file'
modes)
Clicking on the 'Show Log' link will open a page with the contents of the Syslog file;
File size, KB
– maximum log file size (required for 'Local file', 'Server and file' modes).
