WB-2P-LR5. User manual
64
Implement configuration on Internet tile. In Network Mode field, select the required mode: Bridge or Router. If
static settings are used for connection to a provider network, choose
«Static»
value in «Protocol» field and fill the
fields: «IP address», «Netmask», «Default gateway», «Primary DNS Server», «Secondary DNS Server» – the values
are given by service provider.
Configure conection to a base station. Specify SSID of the wireless network, you want to connect to, in the
corresponding field. Select security mode through which authentication in the selected wireless network is
implemented and specify the key if using an encrypted network. After clicking on the 'Apply' button, the subscriber
station will search for the specified SSID on the air and, upon detection, will attempt to connect to the base station
with the specified parameters. If the parameters are specified correctly and the signal level is sufficient, a
successful connection will occur.