WB-2P-LR5. User manual
65
7
Spectrum Analyzer
To use the embedded spectrum analyzer on the WB-2P-LR5, you need to login to the device via telnet or ssh. Enter
the
spectrum-analyzer
command to run it. The analysis time for all the radio channels in the range is
approximately 5 minutes.
The result can be obtained using the
spectrum-analyzer-result
command. Information on the loading of each
channel (in percent) will be displayed in the console:
root
@WB
-2P-LR5:~$ spectrum-analyzer
Spectrum analyzer scanning in progress
root
@WB
-2P-LR5:~$
root
@WB
-2P-LR5:~$ spectrum-analyzer-result
================start dump config================
node: Monitoring.Network.SpectrumAnalyzer
name:
36
, value:
5
name:
37
, value:
5
name:
38
, value:
0
name:
39
, value:
3
name:
40
, value:
1
name:
41
, value:
3
name:
42
, value:
0
name:
43
, value:
3
name:
44
, value:
3
name:
45
, value:
3
name:
46
, value:
0
name:
47
, value:
4
name:
48
, value:
2
...
Please note that all clients will disconnect from the base station during spectrum analyzer operation. The
subscriber stations will be connected again only when the spectrum analyzer finishes its work.