WEP-3ax, WEP-3ax-Z. User manual
18
1.
5.2 Applying configuration and discarding changes
Applying configuration
Visual indication of the process current status of the setting application process is realised in the WEB
interface, Table 5.
Table 5 – Visual indication of the current status of the setting application process
Image
State description
2. Discarding changes
The button for discarding changes appears as follows:
.
Clicking on the
button starts the process of saving the configuration to the device flash memory and
applying the new settings. All the settings come into operation without device rebooting.
After clicking "Apply", the process of settings saving to device memory is launched.
The
mark next to the tab name and on "Apply" button means the process of
settings saving.
Successful settings saving and application are indicated by the
icon in the tab
name.
You can discard changes only before clicking the "Apply" button. If you click the "Apply" button, all the
changed parameters will be applyed and saved to device memory. You will not be able to return to
previous configuration after clicking "Apply".
