WEP-3ax, WEP-3ax-Z. User manual
30
•
•
•
•
•
•
5.4.7 The "Radio Information" submenu
The
"Radio Information"
submenu displays the current status of WEP-3ax, WEP-3ax-Z radio interfaces.
Radio interfaces of an access point may be in two states: "On" and "Off". The status of each of the radio
interfaces is reflected in the "Status" parameter.
Radio status depends on whether a given radio interface has virtual access points (VAP) enabled. If there is at
least one active VAP on the radio interface, Radio will be in the "On" status, otherwise – "Off".
Depending on Radio status, the following information is available for monitoring:
"Off":
Status –
radio interface status;
"On":
Status –
radio interface status;
Mode
– radio interface operation mode according to IEEE 802.11 standards
Channel
– number of the wireless channel on which the radio interface operates;
Channel Bandwidth
– the bandwidth of the channel where the radio interface operates, MHz;
Transmit Power Output
– actual power of the transmitter, dBm.
