WOP-12ac-LR. Quick guide for FBWA configuration via web interface
21
•
•
3. In the
«Operation mode»
field, select the operating mode of the
«Bridge»
device.
in the
«Protocol»
field select protocol for connection of the device via Wi-Fi interface to service provider
network: Static or DHCP.
5. Set the flags in the options
«Use VLAN trunk»
,
«Use Management VLAN»
and
«Use General VLAN»
.
6. In the
«Management VLAN ID»
field, specify the VLAN number that will be used to manage the device. In
the
«General VLAN ID»
field, specify the same VLAN number as in the
«Management VLAN ID»
field:
7. To apply the new configuration, click the
«Apply»
button.
For the example above, the following settings are used:
In the field
«Network Identifier (SSID)»
specify
«Eltex»
;
In the
«Security Mode»
field, select
«WPA2»
;
