Printer Tag
Sense Through
Hole Position
The printer uses a moveable sensor to detect
index holes/notches in tag stock. The sensor
position is indicated by the green arrow at the
front of the label guide that is visible with the
printhead open. The sensor can be moved by
squeezing the two locking tabs, located under
the label guide, and sliding the sensor in or out.
For proper sensing, ensure that the sensor is
aligned with the center portion of the index
hole/notch.
The following dimensions show the required
position of the Sense-Through (“Notch”) hole
on tag stock for the printer.
Dimension
Min.
Max.
Nominal
A
.236"
None
.512"
B
.079"
.512"
.118"
C
.098"
1.520"
N/A
980158-001 Rev.A
33
B
C
A
.314 Nominal Sensor Location
min.
max.
Figure C-1
Tag Position
Sensing Layout
Inside Edge
of Tag Stock
Tag Tear-
away
Summary of Contents for Eclipse LP2344
