Eluktronics p950hr User Manual Download

Page: 147 / 314

Modules & Options

Setting Up SATA Mode (Optane™ or AHCI) 6 - 5

13. Press <F4> and <Yes> to “

Save Changes and Reset

”, however

ensure that the

condition in the bulleted point below is met

before doing so.

• Make sure the

Windows 10

OS DVD is in the attached DVD drive, as the com-

puter starts up it will automatically boot from the

Windows 10

OS DVD (you

will be prompted to press a key to boot from the DVD).

14. Press <F7> as the computer starts up to bring up the boot device menu.
15. Select the DVD drive containing the

Windows 10

OS DVD and press <Enter>.

16. Press a key at system startup to begin installing

Windows

from your

Microsoft

Windows 10

disc.

17. Click

Next

> Install Now

to continue installing the operating system as normal

(see your

Windows

documentation if you need help on installing the

Windows

OS).

18. Select

Custom: Install Windows only (advanced)

19. It is recommended that you select and then delete existing partitions.
20. Click

New

to create a partition for Windows.

21. It is very important to make sure that when you create the partition, to leave at

least a minimum of unallocated space of

5MB

(see sidebar).

22. Follow the on-screen instructions to install the

Windows 10

operating system.

23. Install the

Windows

drivers from the

Device Drivers & Uti User’s Manual

disc as per

Table 4 - 1, on page 4 - 4

(make sure you install the

Intel Rapid

Storage Technology driver

- see overleaf).

24. Run the

Intel® Rapid Storage Technology

application to manage your

Intel®

Optane™

system as instructed in

“Intel® Rapid Storage Technology for

Optane Systems” on page 6 - 48



Creating a Windows

Partition for Optane

When installing

Win-

dows

, make sure that

you leave a minimum of
5MB of unallocated
space for the Intel® Op-
tane™ software to cre-
ate needed metadata.

After you have created a
Windows partition the

Windows Setup

screen

will display the partitions
and sizes, including the
unallocated space. If the
unallocated space is
less than 5MB, then de-
lete the partitions and
recreate them until the
criteria is met.

Note this is

5MB

only,

not GB.

Summary of Contents for p950hr



























































































































































































































































































































Search results

Summary of Contents for p950hr

Reviews:

Related manuals for p950hr

Brands by name

Popular brands

Eluktronics p950hr, User Manual

Search results

Summary of Contents for p950hr

Reviews:

Related manuals for p950hr

Brands by name

Popular brands