Eluktronics p950hr User Manual Download

Page: 250 / 314

Control Center & Flexikey®

B - 16 Keyboard Settings - Express Key

Keyboard Settings - Express Key

To configure a single key to send multiple key combinations, or to create more useful shortcut keys, use

Express

Key

Enable

and select the keyboard under your chosen profile, click on a key to select it, and then click to select

Express Key

Action Type

In the following example we want to change an existing game key configuration which uses the

left shift

key for

sprinting, and the

key for moving forwards, to use the

left Ctrl

key to combine this movement to sprint

forward.

Click on the chosen key for the shortcut action.

Click in the

Tool Tips

field and type to give the key combination a name e.g. “

Sprint Fwds”

, then click back in

the Name field (to avoid adding the recorded keys to the Tool Tips name).

Click

Start Record

and then

press

the key or keys (in this case we will

press

Left Shift and W) required (make

sure you

press the key(s) required

and do not click on them).

Click

Stop Record

to complete the process.

Figure B - 12

- Express Key Record Key Combination

Summary of Contents for p950hr



























































































































































































































































































































Search results

Summary of Contents for p950hr

Reviews:

Related manuals for p950hr

Brands by name

Popular brands

Eluktronics p950hr, User Manual

Search results

Summary of Contents for p950hr

Reviews:

Related manuals for p950hr

Brands by name

Popular brands