Eluktronics p950hr User Manual Download

Page: 260 / 314

Control Center & Flexikey®

B - 26 Mouse Settings - Express Key

Click in the

Tool Tips

field and type to give the key combination a name e.g. “

Sprint Fwds”

, then click back in

the Name field (to avoid adding the recorded keys to the Tool Tips name).

Click

Start Record

and then

press

the key or keys (in this case we will

press

Left Shift and W) required (make

sure you

press the key(s) required

and do not click on them).

Click

Stop Record

to complete the process.

Click

Save

to save the settings within your chosen profile.

If you want to remove any mouse setting click to select it, and then click

Delete

If you want to clear all the settings click

Restore

to return to the default mouse setting.

10. The mouse button for any assigned Express Keys will appear in

orange.

Enabling Time Record for Mouse Settings

If you want to create a delay between key presses within the mouse click combination, then you can use

Time

Record

function to do so in the same manner as that used for keyboard settings (see

“Enabling Time Record”

on page B - 18

Summary of Contents for p950hr



























































































































































































































































































































Search results

Summary of Contents for p950hr

Reviews:

Related manuals for p950hr

Brands by name

Popular brands

Eluktronics p950hr, User Manual

Search results

Summary of Contents for p950hr

Reviews:

Related manuals for p950hr

Brands by name

Popular brands