Eluktronics p950hr User Manual Download

Page: 36 / 314

1 - 4 System Startup

Quick Start Guide

System Startup

Remove all packing materials, and place the computer on a stable surface.

Securely attach any peripherals you want to use with the notebook (e.g. keyboard and mouse) to their ports.

When first setting up the computer use the following procedure

(as to safeguard the computer during

shipping, the battery will be locked to not power the system until first connected to the AC/DC adapter and
initially set up as below):

• Attach the AC/DC adapter cord to the DC-In jack on the left of the computer, then plug the AC power cord into an outlet, and connect

the AC power cord to the AC/DC adapter and

leave it there for 6 seconds or longer

• Remove the adapter cord from the computer’s DC-In jack, and then plug it back in again; the battery will now be unlocked.

Use one hand to raise the lid/LCD to a comfortable viewing angle (

do not exceed 130 degrees

); use the other

hand to support the base of the computer (

Note

Never

lift the computer by the lid/LCD).

130



Shutdown

Note that you should al-
ways shut your comput-
er down by choosing the

Shut Down

command

Windows

(see page

1 - 38

). This will help

prevent hard disk or sys-
tem problems.

Figure 1 - 1

- Opening the Lid/LCD & Computer with AC/DC Adapter Plugged-In

Summary of Contents for p950hr



























































































































































































































































































































Search results

Summary of Contents for p950hr

Reviews:

Related manuals for p950hr

Brands by name

Popular brands

Eluktronics p950hr, User Manual

Search results

Summary of Contents for p950hr

Reviews:

Related manuals for p950hr

Brands by name

Popular brands