Eluktronics p950hr User Manual Download

Page: 221 / 314

Troubleshooting

Problems and Possible Solutions 7 - 11

The

system freezes

or the screen goes

dark.

The system’s power saving features have timed-out

. Use the AC/DC adapter,

press the sleep (

Fn + F12

) key combination, or press the power button if no

LEDs are lit.

The system never goes into a

power

saving mode

Power Options features are not enabled. Go to the

Windows

Power Options

menu and enable the features you prefer (see

“Power-Saving States” on

page 3 - 7

). Make sure you have enabled

Hibernate

mode from the control

panel.

The computer is off (or in Sleep Mode) but
powered by the AC/DC adapter plugged in
to a working outlet, or by battery with a
capacity above 20%.

I have plugged a

device into the powered USB port

order to charge it, but

the device is not

charging

The port is not powered on.

Toggle power to the port using the

Fn + power

button

combination

This function may not work with certain external USB compliant devices (check
your device’s documentation).

If this is the case,

power the computer on and

connect the external USB device

in order to charge it.

Note

that this function is designed to help

charge USB compliant devices

, but

not designed to allow their operation

The

Wireless LAN/Bluetooth

modules

cannot be detected.

The modules are off as the computer is in

Airplane Mode

Go to the

Charms

Bar

and select

Settings

and then click the WiFi icon (Airplane mode should be

Off).

The

PC Camera

module cannot be

detected.

The module is off.

Press the

Fn + F10

key combination in order to enable the

module (see

“Keyboard Shortcuts” on page 1 - 18

). Run the camera

application to view the camera picture.

Problem

Possible Cause - Solution

Summary of Contents for p950hr



























































































































































































































































































































Search results

Summary of Contents for p950hr

Reviews:

Related manuals for p950hr

Brands by name

Popular brands

Eluktronics p950hr, User Manual

Search results

Summary of Contents for p950hr

Reviews:

Related manuals for p950hr

Brands by name

Popular brands