Eluktronics p950hr User Manual Download

Page: 252 / 314

Control Center & Flexikey®

B - 18 Keyboard Settings - Express Key

Enabling Time Record

If you want to create a delay between key presses within the key combination, then you can use

Time Record

function to do so.

Enable

and select the keyboard under your chosen profile, click to select a key for the shortcut action, and then

click to select

Express Key

Action Type

Click in the

Tool Tips

field and type to give the key combination a name, then click back in the Name field (to

avoid adding the recorded keys to the Tool Tips name).

Click

Start Record

and then

press

the key or keys required in the sequence and time delay between key

presses required (make sure you

press the key(s) required

and do not click on them).

Click

Stop Record

Click to select a key in the sequence and click

Enable Time Record

, then click a

key to view the time delay.

Figure B - 14

- Enable Time Record

Summary of Contents for p950hr



























































































































































































































































































































Search results

Summary of Contents for p950hr

Reviews:

Related manuals for p950hr

Brands by name

Popular brands

Eluktronics p950hr, User Manual

Search results

Summary of Contents for p950hr

Reviews:

Related manuals for p950hr

Brands by name

Popular brands