Eluktronics p950hr User Manual Download

Page: 89 / 314

Features & Components

Audio Features 2 - 17

Setup for Headphones/Speakers/S/PDIF - 2-In-1 Audio Jack

To connect either headphones, speakers or a S/PDIF supported system to the 2-In-1
audio jack follow the instructions below:

Plug either the headphones or a S/PDIF supported system in to the 2-In-1 audio
jack.

When the pop-up menu appears make sure you select the appropriate device by
putting a check in the box alongside it and clicking OK.

To make sure the pop-up menu appears see sidebar.



Auto Pop-Up Dialog

You should enable the
auto pop-up dialog to
automatically detect
when a device has been
plugged-in. If disabled,
double-click

connector

settings

and click

the box to enable the
auto pop-up detection of
plugged-n devices.

Figure 2 - 17

Pop-Up Menu for

Audio Devices

(2-In-1 Audio Jack)

Summary of Contents for p950hr



























































































































































































































































































































Search results

Summary of Contents for p950hr

Reviews:

Related manuals for p950hr

Brands by name

Popular brands

Eluktronics p950hr, User Manual

Search results

Summary of Contents for p950hr

Reviews:

Related manuals for p950hr

Brands by name

Popular brands