3A
more than 12 meters.
Disconnect mains power before fuse/lamp replacement or servicing.
Replace fuse/lamp only with the same type.
In the event of a serious operating problem, stop using the unit immediately.
Never turn the unit on and off in short intervals.
The housing, lenses, or the ultraviolet filter must be replaced if they are visibly damaged.
Do not open the unit as there are no user serviceable parts inside.
Do not attempt to repair the unit by yourself. Repairs carried out by unskilled people can lead
to damage or malfunction. Please contact the nearest authorized technical assistance center if
needed.
Disconnect the mains power if the fixture is not to be used for a long time.
Use the original packing materials before transporting the unit.
To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or
moisture.
Hot lamp explosion hazard. Do not open the unit within 15 minutes after switching off.
Replace the lamp once it is damaged, deformed or past its expiry hours
Do not look directly at the light while the lamp is on.
Never touch the lamp with bare fingers, as it is very hot after use.
Do not switch on the unit without lamp enclosure or when housing is damaged.
