background image

Overview:

You should find inside the Elemen8 carton the following items

:

1, LED Zoom 

2, Instruction manual,     

3, Power Cable

 

Technical Specifications:

DMX channels: 1 or 3 selectable

1 x 50W or 100W White LED (5600K or 3200K)

Dimming, master/slave and DMX modes

400Hz refresh rate 

5-pin XLR in/out sockets

4 push button menu with LCD display

Powercon in/out sockets

Beam angle: 10-50 degrees

Power supply: 100-240V~50/60Hz

Power consumption: 50W version - 77W 

Power consumption: 100W version - 126W 

Dimensions: 350 x 165 x 255mm

Weight: 50W version - 4.6Kgs 

Weight: 100W version - 5Kgs 

Operating modes:  

1, Dimming 0-100%

 

                2, DMX

 

 

3, Master/slave 

 

 

4, Channel select

 

 

5, Dimming curves

Overview:

50W Back

Note: To use the focus knob on the rear of the 100W fixtures, simply turn the knob counter clock wise 

          to zoom in (s) and turn it clockwise to zoom out (L).

100W Back

MENU

POWER IN

POWER OUT

FUSE

F2A~250V

ENTER

LCD DISPLAY

UP

DOWN

DMX OUT

DMX IN

3

MENU

DMX IN

POWER IN

POWER OUT

FUSE

F2A~250V

DMX OUT

DMX IN

DMX OUT

ENTER

LCD DISPLAY

UP

DOWN

100W LED ZOOM COOL WHITE

FOCUS

S

L

Summary of Contents for ELUM042









Reviews: