l
One Color wheel with seven colors plus white
l
Rotating prism and iris
l
Automatic pan/tilt position correction
l
Power Voltage: AC 100
‐
240V~50/60Hz
l
Power Consumption: 330W
l
Light Source: 1 x 180W LED
l
Beam Angle: 13°
l
Weight: 17.5Kgs
l
Dimension: 436 x 344 x 588mm
3. How To Set The Unit
3.1 Control Panel
3.1.1. Rear Panel:
3.1.2. Front Panel
l
Display: To show the various menus and the selected functions
l
Button:
MENU
To select the programming functions
DOWN
To go backward in the selected functions
UP
To go forward in the selected functions
ENTER
To confirm the selected functions
l
DMX IN:
DMX 512 link, use 3pin XLR cable to link the fixture and the DMX controller
l
DMX OUT:
DMX 512 link, use 3pin XLR cable to link the next fixture
l
Fuse (T 6.3A):
Protects the unit from over voltage or short circuit
l
MAINS IN:
PowerCON connection to mains power supply
l
MAINS OUT:
PowerCon loop connection for main power supply to the next unit
3.2 Gobo Wheel
3.3 Main Function
To select any of the given functions, press the
MENU
button up to where the
required function is showing on the display. Select the function by
pressing the
ENTER
button and the display will blink. Use the
DOWN
and
UP
buttons to change
the mode. Once the required mode has been selected, press the
ENTER
button to
confirm. To go back to the functions without any changes, press the
MENU
button
