background image

This guide will provide directions on how to correctly and safely assemble 

and install your screen. 

Please follow the steps as instructed. If difficulty 

arises, please see the Troubleshooting section.

Check the parts and accessories inside the packaging to make sure nothing 

is missing.

Aluminum Inner 

Frame

Aluminum Velvet 

Cover

Plastic Rods

GETTING STARTED

Parts Included

Springs

(Amount differs on size)

Corner Brackets

8pcs

Expansion Plugs

(Amount differs on size)

Hanging Brackets

(Amount differs on size)

Set Screws 

(Amount differs on size)

Bracket Screws

(Amount differs on size)

Support Bar 

(1pc for select sizes)

And related accessories

Screen Fabric

 

(With Floor Cloth)

1 Roll

Installation Hook

2pcs

3

The following items will be included in the Accessories Box:

Joint Brackets

4pcs

The Elara NanoEdge screen comes with an RF remote. The IR control kit 

is optional and available for purchase.
An LED lighting kit for the Elara NanoEdge is optional and available for 

purchase.

Please make sure you have sufficient space for your screen on the wall or  

preferred location. Refer to the table below for screen sizes: 

Screen

Size

Aspect Ratio

Assembled 

Height

Assembled 

Width

Assembled 

Depth

92”

16:9

81”

46”

2”

106”

16:9

93”

53”

2”

120”

16:9

106”

60”

2”

135”

16:9

119”

67”

2”

GETTING STARTED

General Dimensions

Projection Setup

There are two projection methods available: front projection and  rear 

projection. The Elara NanoEdge fixed frame screen is designed for front 

projection; please make sure you are using the correct projection method.

The distance required between the projection screen and the projector de-

pends on the lens in the projector. Please refer to your projector’s manual 

for more details.

4

Before You Start

You are now ready to assemble your screen. You will be assembling 3 

major parts of the screen: the Aluminum Frame, Screen Fabric, and Velvet 

Cover. Please carefully go through the following steps one by one.

Summary of Contents for Elara NanoEdge
















Reviews: