Carefully place the assembled aluminum frame onto the fabric with the
frame’s large flat surface against the back (labeled) of the screen as shown
below. Make sure the aluminum frame is centered properly by aligning the
corners of the frame to the corners of the fabric.
Do not stand the frame on its corner as the sharp edge will dam-
age the screen fabric.
5a)
ASSEMBLY
13
Flip over the sides of the fabric with plastic rods onto the edges of the
aluminum frame, as illustrated below:
5b)
ASSEMBLY
14
The fabric and the frame will be joined with springs. First the corners will
be secured, then the sides will be secured starting from the corners and
moving towards the middle. The shorter sides should be secured first for
optimal tension. The priority that the springs should be secured is below.
5c)
Pick a corner to start working at. Mount 4 springs in the 4 holes that are
closest to the corner starting with the vertical side (2). Repeat with all 4
corners.
5d)
1
1
1
1
2
2
3
3
2
2
3
3
Summary of Contents for Elara NanoEdge
Page 1: ...User Guide Elara NanoEdge Fixed Frame Screen ...
Page 15: ......
