5. Once the screen fabric is fully
unfolded, secure it to the frame with
the snaps. Secure the snaps starting
from the corners and working towards
the middles. Secure the shorter side
before the longer side.
6. Take the folding legs out of the box
and unfold as shown. Make sure the
hinges click into place.
If the diagonal of your screen is 20
0” or
greater, use the hand screws to secure
the support leg to the vertical leg in an
appropriate position. The support leg
can be adjusted to an appropriate
length. If the frame is attached to the
legs higher up than the support leg, the
support leg should also be attached
higher up.
7. Lay the frame on the floor and
position the legs over the sides of the
frame at the desired height. Use the
hand screws to loosely attach the
frame. Repeat with the other leg and
when in the desired position, proceed
tightening both sides firmly.
8. When the frame is in the vertical
position, fold the front facing feet of
the legs out. Assembly is completed
and the projection screen will be stable
on a flat surface.
9. After using the screen, disassemble
the screen and store it in the box
provided. To disassemble the screen,
implement the assembly procedure in
reverse order.
