52
ber of valve operating mechanisms that are used for the
heating control first, before you transmit the safety code
to the valve operating mechanism.
• The valve operating mechanism acknowledges recep
tion of the first radio log with an acoustic signal.
• The antenna symbol is permanently displayed.
• Installation is now finished and you may adapt the pre
programmed settings to your individual needs.
Proceed as described above for mounting of further valve
operating mechanisms. Next, you have to set the number of
valve operating mechanisms and transmit the safety code .
Adaptors for valves of other manufacturers may be pur
chased separately (they are not enclosed in the scope of
supply).
RAVL
RAV
RA
After snappingon the adap
tors for the valves of the types
“RAV” and “RA” on the valve
body fix the adaptors with the
enclosed screws and nuts.
For valves of the type “RAV”
additionally put the cylindri
cal extension piece onto the
valve pin.
Examples of “Danfoss” adaptors:
