Troubleshooting
27
© 2020, Elon Group AB. All rights reserved.
CAUTION!
Make sure the hinges are correctly positioned in their hooks. Otherwise the door may not open and close
properly.
Remove and install the oven door glass pane
Remove the oven door glass pane if it is broken or if you want to clean it.
1.
Remove the oven door from the appliance (section "Replace the oven door",
2.
Lift the supports a little and pull them out.
3.
Lift up the lower end of the glass pane and remove it.
Install in the reverse order.
NOTE!
The markings (semicircle) on the door and the glass pane should overlap.
Remove and install the wire guides
Use this procedure to remove and install the wire guides.