4) Lower the door on to the bottom hinge and fit the upper hinge,
screws, and upper cover.
2.4 REPLACING THE LIGHT (OPTIONAL)
Replacement or maintenance of the LED light should be carried out by
the manufacturer, the manufacturer’s service agent or a similarly
qualified person.
Replacing incandescent bulbs:
Disconnect from the electrical supply before replacing the bulb.
Remove the light bulb cover.
Remove the old bulb by unscrewing it counter-clockwise. Replace with a
new bulb (max. 15 W), screwing it in clockwise, and make sure it is fixed
in the bulb holder tightly. Refit the light cover and reconnect your
refrigerator to the electrical supply.
(Above illustration is only for reference. The actual configuration will
depend on your particular product or statement by the distributor.)
60
61
© 2021, Elon Group AB. All rights reserved.