16
Washing
© 2020, Elon Group AB. All rights reserved.
Change the spin speed
1.
Touch
to cycle through the available speeds: (0, 400, 600, 800, 1000, 1200, 1400)
NOTE!
When the spin speed indication lights are off the spin speed is 0.
NOTE!
Higher spin speeds create more noise and lower residual moisture content.
Change the temperature
1.
Turn the programme selector to select a programme.
2.
Touch
to cycle through the available temperatures: (Cold, 20 °C, 30 °C, 40 °C, 60 °C, 90 °C)
Use the Delay option
1.
Turn the programme selector to select a programme.
2.
Change settings and select options if needed.
3.
Touch
to cycle through the available delay times.
4.
Touch
.
The washing cycle will start after the delay time has passed.
You can cancel the delay timer by touching
to cycle through the available delay times until the display
shows 0H.
Use the Extra rinse option
1.
Turn the programme selector to select a programme.
2.
Touch
to cycle through the available options until
is displayed.
NOTE! The Extra rinse option can be used together with the Pre-wash option. Cycle through the options until
both
and
are displayed.
3.
Press
.
Use the Pre-wash option
You need to add pre-wash detergent when you select this option. See section "Detergent dispenser",
1.
Turn the programme selector to select a programme.
2.
Touch
to cycle through the available options until
is displayed.
NOTE! The Pre-wash option can be used together with the Extra rinse option. Cycle through the options until
both
and
are displayed.
3.
Press
.
Use the SpaCare option
This option is available with the programmes Cotton, Baby care, Bed linen and Mix.
NOTE!
SpaCare uses steam to improve the washing result. In the beginning of the washing cycle, the water will be
heated to up to 70 °C to create steam inside the drum.
