Elvox 68TC/K, Installation And Operation Manual

GB

6/32

Art. 68TC/K, 68TU/K

SPEECH UNIT

ART. 68TU/K93

Description

Art. 68TU/K93 is an audio speech unit for use with 2-Wire video kits. It is
equipped with an input which allows the connection of an outdoor CCTV ca-
mera. It can only be fitted to Art. 13K1 entrance panels in the 1300 series.

Speech unit (Art. 68TU/K93) technical specifications
-  Operating temperature from - 5° to + 45° C.
-  Subject lighting by means of infrared LEDs
-  Name-tag lighting through LEDs
-  Built-in speech unit
-  Removable terminal block
-

Input for video signal from an outdoor camera.

-  Monitor call push-button.
-  Output for control of lighting floodlight by relay type 0170/101
-

Local door release control from entrance panel.

-

Adjustable lock activation time (from 0 to 30 seconds).

-  Supply voltage from the bus.
-  External dimensions: 80x120x25 mm.

Speech unit (Art. 68TU/K93) controls

The following controls are located on the back of the speech unit:

Fig. 1

Fig. 2

LED CH2

12V

Lock activation

time

External
volume

Internal
volume

Camera activation
time

Camera terminals type 68TU/K, 68TC/K

CL, M) 

Connection for relay type 0170/101 for additional floodlight.
(for switching on illumination in the camera's observation zone)
It is activated for the time the camera is on.

CA, M) 

Connection for additional lock push-button.

PA, M) 

Connection for "open door" sensor. The sensor must be a nor-
mally open contact which closes when the door is open.

B1, B2)  BUS line

S-, S+)   Output for electric lock supply voltage (12V 

).

V)

Connection for video signal from an outdoor camera.

*

The panel supplies a current peak IT> 1A for 10 mS, followed by a hold
current I

M

= 200mA for the entire duration of the lock control.

*

ENTRANCE PANEL/CAMERA identification code

If more cameras/entrance panels are installed on the building it is necessary
to identify the cameras with a different code. The identification code is as-
signed by inserting the jumpers in the contacts as shown on the figure.

1st camera
IT=0

(Default)

2nd camera
IT=1

OPERATING DWELL TIME

The monitor, camera, door lock and auxiliary services mut operate accor-
ding to the following intermittent cycles.
Monitor and camera activation cycle:
max. 90 seconds activated, 90 seconds deactivated
Door lock cycle:
max. 1 second activated, 5 seconds deactivated
Auxiliary service cycle:
max. 90 seconds activated, 90 seconds deactivated

Microphone

Name tag lighting
LED

1st push-button

2nd push-button

Name tag lighting
LED