background image

12

FILIALE DI MILANO: 

Via Conti Biglia, 2   20162 (MILANO)

Tel. 02/6473360-6473561

Fax 02/6473733

E-mail: filialemilano@elvoxonline.it

FILIALE TOSCANA: 

Via Lunga 4/R   50142 FIRENZE

Tel. 055/7322870 - Telefax. 055/7322670

E-mail: filialetoscana@elvoxonline.it

UNI EN ISO 9001

ELVOX COSTRUZIONI 

ELETTRONICHE S.p.A.

35011 Campodarsego (PD) - ITALY

Via Pontarola, 14/A

Tel. 049/9202511 r.a. - 

Phone international... 39/49/9202511

Telefax Italia 049/9202603

Telefax Export Dept... 39/49/9202601

ELVOX INTERNET SERVICE

E-mail: info@elvoxonline.it   

http://www.elvox.com

E-mail export dept: 

elvoxexp@elvoxonline.it

SAFETY INSTRUCTIONS FOR INSTALLERS

- Carefully read the instructions on this leaflet: they give important information on the safety, use and maintenance of the instal-

lation. 

- After removing the packing, check the integrity of the set. Packing components (plastic bags, expanded polystyrene etc.) are

dangerous for children. Installation must be carried out according to national safety regulations.

- It is convenient to fit close to the supply voltage source a proper bipolar type switch easy accessible with 3 mm separation (min-

imum) between contacts.

- Before connecting the set, ensure that the data on the label correspond to those of the mains. 
- Use this set only for the purposes designed, i.e.for electric door-opener systems. Any other use may be dangerous. The man-

ufacturer is not responsible for damage caused by improper, erroneous or irrational use. 

-

Attention:

to avoid hurting himself, this appliance must be fixed to the soil/wall according to the installation instructions. 

- Before cleaning or maintenance, disconnect the set.
- In case of failure or faulty operation, disconnect the set and do not open it. 
- For repairs apply only to the technical assistance centre authorized by the manufacturer.
- Safety may be compromised if these instructions are disregarded. 
- Do not obstruct opening of ventilation or heat exit slots and do not expose the set to dripping or sprinkling of water. 
- Installers must ensure that manuals with the above instructions are left on connected units after installation, for users' infor-

mation. 

- All items must only be used for the purposes designed. 
- The installer must make sure that the information for the user be present with the appliances.
- This leaflet must always be enclosed with the equipment.

Directive 2002/96/EC (WEEE)

The crossed-out wheelie bin symbol marked on the product indicates that at the end of its useful life, the product must be hand-
led separately from household refuse and must therefore be assigned to a differentiated collection centre for electrical and elec-
tronic equipment or returned to the dealer upon purchase of a new, equivalent item of equipment.

The user is responsible for assigning the equipment, at the end of its life, to the appropriate collection facilities. Suitable diffe-
rentiated collection, for the purpose of subsequent recycling of decommissioned equipment and environmentally compatible treat-
ment and disposal, helps prevent potential negative effects on health and the environment and promotes the recycling of the
materials of which the product is made. For further details regarding the collection systems available, contact your local waste
disposal service or the shop from which the equipment was purchased.

Risks connected to substances considered as dangerous (WEEE).

According to the WEEE Directive, substances since long usually used  on electric and electronic appliances are considered dan-
gerous for people and the environment. The adequate differentiated collection for the subsequent dispatch of the appliance for
the recycling, treatment and dismantling (compatible with the environment) help to avoid  possible negative effects on the envi-
ronment and health and promote the recycling of material with which the product is compound.

Summary of Contents for 8017













Reviews: