7
MODE VALUE
SET
TOTAL EFFECT
0
0
The output functions in timed mode (is activated and remains active only for
the corresponding set time interval)
1
1
As per 0 (above) but also activates output 4 (with specific time interval). In
practice 2 devices are activated with time intervals that can differ greatly
2
2
As per 0 but also transmits the programmed code on the serial line (for
remote activations/recordings)
3
2+1
Combination of points 2 and 1. Timed output with activation of output 4 and
delivery of code on serial line (for remote control).
4
4
ON-OFF mode
5
4+1
4+1 As per 4+1. ON-OFF mode with timed simultaneous activation of out-
put 4.
7
4+2+1
4+2+1 As per 4+2+1. ON-OFF mode with timed simultaneous activation of
output 4 and delivery of command on serial line (for remote control).
8
8
Combined mode. Uses 2 touchkeys for output 1 (separate ON and OFF)
16
16
As per 0 but the programmed times are in minutes instead of seconds (max
255 minutes)
17
16+1
As above but also activates output 4 (with specific times).
32
32
Activates the request of the output number to be activated.
33
32+1
As per 32+1: Activates the request of the output number to be activated and
simultaneously activates output 4 ( with specific times)
48
32+16
As above, but the times are in minutes on the corresponding output.
64
64
Enables operation as manual key. The relative terminal of the touchkey no
longer functions as a touchkey reader but as an NO contact. Relative acti-
vation is simply by closing to earth (terminal 4). Enables timed accessory
pushbuttons. The function is not valid for touch 1 terminal.
128
128
Activates the day-night operating mode for the service light (S4).
