Elvox DIGIBUS 7200 Series, Installation And Operation Manual

5

GB

Monitor technical specifications  

- ABS video interphone 
- Removable terminal block  
- 7" TFT LCD monitor, 16:9 widescreen aspect ratio  
- Standard PAL video signal  
- Operating temperature from 0°  to +40° C 
- Electronic ringtone   
- Input for landing calls with different ringtone from entrance panel calls.
- Output for additional ringtone type  860A.
- Option of selecting hands-free communication mode (e.g. no need to

keep the talk/listen button pressed) or push-to-talk mode 

- Dimensions: 193x159x18 mm + 31 mm (for flush-mounting)

E)

Pair of push-buttons “

” and “

”: for activating addi-

tional auxiliary functions (“

” to activate function F7, “

”

to activate function F8) and for brightness control (with display ON),
melody selection (with display OFF).

F) Push-button :

F3, F4, F5 function command and/or to enter

setting mode.

G) Push-button :

for auxiliary service (F1 function command).

H) Push-button 

: For door lock release (when monitor is called)

and/or call command to switchboard and/or secondary lock release on
door panel.

I)

Talk/listen push-button:

to communicate with the speech

unit on receiving a call. The default conversation mode is “HANDS
FREE”. Alternatively the unit can be set to push-to-talk mode (see
paragraph “Communication mode selection function”).

L)

Ringtone mute indicator:

if the red LED lights up, this indica-

tes that the call tone is off. The red LED also remains on throughout
the conversation, e.g. as long as the audio connection is active.   

M)

Door open indicator: 

if the green LED lights up, this indicates

that the door is open (this function is optional depending on the type
of installation). If the green LED is flashing, this also indicates setting
mode, enabling the brightness, contract, volume or melody to be adju-

sted using the arrow buttons “

, 

, 

“ and

”

”.

Removable connection terminal block

Fig. 1B

Terminal block

1)

Digital call line

2)

Secondary entrance panel audio line

3)

Audio line

4)

Negative line

5)

+ 13,5V DC line

6)

Inserted monitor signalling (for additional chimes or other services)

7)

Negative power supply from main power supply unit type 6948.

8)

Positive power supply from main power supply unit type 6948.

9)

Line for outside door call.

10) Supply voltage for video floor distributor
11) F1 - connection for auxiliary functions, to be connected if indicated

on the diagram.

12)

Not used

13)

Supply voltage for green LED indicator

V1)  Input for the video signal
M) Video 

earth 

V3)   Video signal input for cable other than coaxial

B

A

D

L

E

C

F

H

G

I

M

Fig. 1A

Connection terminal block and settings on back of monitor

I N T R O D U C T I O N

DESCRIPTION 

Type 7214 is a 7200 series open-voice monitor with 7" TFT LCD screen
(thin film transistor for active matrix display) with 16:9 widescreen
aspect ratio, for DIGIBUS video interphone installations.  It is equipped
with a backlit keypad consisting of 8 push-buttons, 4 for conventional
functions: door lock release, conversation, stair light service, and 4
push-buttons for activation of additional auxiliary functions. These latter
push-buttons are also used for the following settings: brightness and
contrast control, ringtone volume control and mute, selection of different
ringtones, conversation volume control, selection of communication
mode and activation of automatic answer function. The device also has
two LEDs (red and green) for indicating ringtone mute, door/gate open
and setting mode.
The monitor is equipped with a removable cover and is available in a
range of alternative colours. Installation of monitor type 7214 requires
the use of back box type 7249. 
The back box is made of ABS plastic and is equipped with a cover to
prevent the ingress of mortar and grout during masonry work. Its dimen-
sions are 189x160x52 mm.  

Caution:

In the case of systems with separate cameras, we recommend

using cameras with a minimum resolution of 420 TV lines.

Colour adjustment trimmer 

Front panel commands and controls

A)

7" TFT LCD colour screen, 16:9 aspect ratio

B)

Microphone

C)

Loudspeaker 

D)

Pair of push-buttons “

” and “

”: for activating addi-

tional auxiliary functions (“

” to activate function F2, “

” to

activate function F6) and for adjusting contrast (with display ON), con-
versation volume (with audio connection active) and ringtone volume
(with display OFF).