Main features
•
Voice Activating System (VAS)
•
Timers: Once and Daily
•
Linear and circular recording
•
Built-in clock, calendar
•
Password protection of the records
•
Built-in digital markers provides protection from modification of records
•
Control and indication: switch and LED
Operating the recorder
For recorders with battery first set the battery in the recorder. LED will flash three
times and then will light for 40 seconds. After LED extinction the recorder is ready for
operation.
Attention! When installing batteries, observe the polarity (see marking on the recorder's
case). Inappropriate installing of battery may lead to failure of the recorder system,
which is not covered by the Warranty. Do not store the recorder for a long time with a
battery inserted, as the battery may leak and lead to recorder failure, and that is not
covered by the Warranty.
For recorders with rechargeable battery, first charge the battery. To do this, gently and
without strain follow the correct polarity, connect the recorder to the USB adapter, which
is in the delivery set, aligning the mark on the recorder with the one on the adapter.
Connect the adapter to the USB port of the PC or charger device, e.g. of a mobile phone,
with the output voltage of 5V and a USB connector. During charging, the LED flashes
rarely (interval of 5 seconds), and after charging has been completed, it starts flashing
frequently. Full charging takes approximately 2.5 hours.
Please note: In order to avoid deep discharge and related damage of the rechargeable
4
