Record playback
Turn the Recorder to OFF position and wait until the LED turns off. When connecting
recorder to the PC please comply with strict order: first connect USB adapter to the
recorder, next connect adapter to the PC port (disconnection order: first disconnect
the USB adapter from the PC, then recorder from the adapter). Red and green LEDs
blink briefly on the adapter. Windows recognizes a new removable drive, which
contains two files: EMPlus.exe and emplus.srv. Run “EMPlus.exe” program.
During first connection there will be an offer to install program to your PC. After
accepting short and full operation manuals, EMPlus and SoundProcessor programs
and manuals will be installed to the hard drive.
Run “EMPlus.exe” program from recorder or hard drive.
Choose connection type USB 2.0 HS. The content of the recorder is on the left side of
the window. Select the desired record and click Play on the bottom of the left panel.
To upload right click on the selected record and choose «Copy to default folder» from
the context menu. The record will be converted to WAV to be displayed at the right
panel.
Reset
In case of rechargeable battery operation error press the Reset button with sharp thing
(match or toothpick). For the recorders with batteries: remove and install battery again
in a few seconds. For the recorders with external supply: shut down and then turn on
the power supply.
Detailed information about operation and capabilities of the recorders see in Full
operation manual.
6
