04
4.1 How to ride
4. How to ride
1. Turn on the E-Scooter by pressing the power button
for 2 seconds and check the battery power level.
Power key
3. Turn off the scooter by holding the power button when
you are done riding.
2. In order to let the electronic motor accelerate, push yourself of the ground a few times to
reach the minimum speed and hold down the accelerator paddle to accelerate.
You can control your speed by easing up on the accelerator. If you come to a complete halt
you have to push yourself off again.
Power key
Warning: If the E-Scooter has an electric brake and a rear physical break, the
electric brake is to be used first and the rear break only as auxiliary brake,
in case of the electric brake not working properly or is not sufficient.
Do not use the rear brake excessively, as it could damage the tire or fender.
Warning: Accidents could occur during practice. Make sure to wear an appropriate helmet and protectors during
riding. E-Scooter is not suitable for people under 14 Years!
The quoted regulations pertain to gerrman law. Please inquire about your countries/states legislations.
