JY926A Coin Selector
For Detailed Product Information Please contact:
Emaar Impex Pvt. Ltd.
Email:
sales@emaarindia.in
302/303,Diamond Plaza,
Phone:
+91-22-43688 688
Lamington Road,
Grant Road.Mumbai-400004
Sampling:
1.
Hold on the button " Setup" for seconds, then letter "A1" will appear from the LED display.
2.
Please start to sample the first kind of coins. The letter "A1" will appear again after finished.
3.
Hold on the button "Setup" for seconds, then letter "A2" will appear. Next, please start to sample second kind of
coins. The letter "A2" will appear again after finished.
4.
Please repeat No.3 until all kinds of coins you need is set up.
※
If you already set up all kinds of coins you need, and it is less than the product has, please keep holding on
the button " setup" for seconds to skip the rest sampling. For example: If you choose "6-kind-of-coin of multi-
coin selector" to set up 4 types of coins, please hold on the button "setup" for seconds to skip the sampling of
fifth and sixth kind of coin after you finish fourth kind of coin.
5.
The system will restart automatically after finished.
6.
The product can be used after finishing sampling.
If you don't need to use AP mode, please skip AP mode setting.
AP mode
1.
Using this mode, you are able to control the output pulse ratios.
2.
Please hold on the button "Setup" and the button "Add" simultaneously for seconds, then hold on the button
"Setup" for seconds to get into AP mode.
3.
Please select the value of AP mode. The coin selector will generate 1 external signal output when the internal
signal- "P" value of parameter- reaches the value.
4.
The default value of AP mode is 1.
Recover Factory Default
If you want to clear all setting and sampling you have set up,
1.
Turn off power.
2.
Hold on the button "setup" and the button "add" simultaneously.
3.
Turn on power.
4.
Release the buttons when hearing beep.
