ENG-00178-20P-PPC-E10_User_Manual.docdoc
-4-
Rev 2.0 © 2014 EMAC, Inc.
1.2
Standard PPC Specifications
CPU:
Fanless ARM Cortex A8 600Mhz Processor
Flash:
2GB of eMMC Flash.
RAM:
256MB of
DDR2 RAM.
Video:
1024 x 600 WVGA @ 256K Colors
Touchscreen:
12-Bit, 4 wire analog resistive Touchscreen
Flash Disk:
1 Micro SD flash card socket
System Reset:
Processor Internal Reset Management with External Reset Button provision
RTC:
Battery backed Real Time Clock/Calendar.
Timers:
11, general purpose Timers, & Counter/PWM
Watchdog Timer:
2 Internal Watchdog Timers
Analog I/O:
1 channel, 12-bit Analog-to-Digital converter (ADC)
GPIO:
16 Programmable 3.3V I/O lines
Serial Interfaces
UARTS:
3 serial RS232 serial ports with handshaking & 1 RS232/422/485 with Auto RS485
SPI:
High-Speed SPI port with Chip Selects.
I2C:
I2C port
Audio:
I2S Synchronous Serial Controller with Stereo Line In/Out
CAN:
CAN 2.0B Port
USB:
2 USB 2.0 (High Speed) Host ports
1 USB 2.0 (High Speed) OTG Host/Device port
LCD
Display Type:
10" TFT Color LCD
Resolution:
1024 x 600 WVGA @ 256K Colors
Dot pitch:
0.19mm x 0.19mm
Luminance:
330 (cd/m²)
Viewing Angle:
55°
Brightness:
Software controlled
Backlight:
White LED (33 LEDS)
Touchscreen
Type:
4 Wire Analog Resistive
Resolution:
Continuous
Controller:
Built-In
Driver:
Linux
Durability:
Over one million touches
Ethernet interface
Ethernet MAC:
Built-In
Ethernet PHY:
Micrel KSZ8041
Ethernet Type:
10/100 Base-T Ethernet
Ethernet Interface:
On-Board RJ-45 connector
