ENG-00178-20P-PPC-E10_User_Manual.docdoc
-6-
Rev 2.0 © 2014 EMAC, Inc.
PPC-E10 Product Details
1.4
Jumper Configuration & Connector Descriptions
The PPC-E10 comes factory configured. In the event that jumpers need to be verified or modified this section
provides the information required, including instructions on setting jumpers and connecting peripherals, switches
and indicators. Be sure to read all the safety precautions before you begin any configuration procedure. See
Appendix A for connector pinouts and Appendix B for Jumper Setting descriptions.
Table 1: Jumpers
Label
Function
Default
JB1
Boot0 Source Selection
Position B
JB2
Boot1 Source Selection
Position A
JB3
Resident Flash Write Protect (GPIO_62)
Position A
JB4
RTC Battery ON/OFF
Off
JB5
Serial Port RS422/485 Tx Enable
422
JB6
Serial Port RS232 or 422/485 Mode
232
Table 2: Connectors
Label
Function
CN1
7” Touch Screen Connector
CN2
Serial Port COM A
CN3
10” Touch Screen Connector
CN4
7” LCD Backlight Connector
CN6
7” LCD Data Connector
J1
Vin Locking Connector
JK1
Vin Power Barrel Jack
JK2
Ethernet
JK3
USB Host Port A & Port B
JK4
USB OTG Port C
JK5
Audio Input Jack
JK6
Audio Output Jack
HDR1
Misc. I/O Connector
HDR2
Serial Port COM D
HDR3
Serial Port COM B
HDR4
Serial Port COM C
HDR5
Bulkhead USB Connector Port A & B
HDR6
LVDS & Touch Signal Connector
SOK1
MicroSD Card Socket
SOK2
200 pin SOM Socket
ABJ1
PCD-E12 Expansion Module Connector
1.5
Power Connectors
The PPC-E10 provides two power connectors. J1 is an AMP/Tyco locking power connector (part# 640445-3),
three-pin type connector that mates with TE Connectivity part# 647402-3 power connector using crimp pins part#
3-647406-1. Using this power input provides for a more rugged/industrial locking connection. JK1 is a standard
5.5mm barrel jack with an inner diameter of 2.1mm with a center V+ connection. This jack allows for easy
connection to a wall mount power supply (EMAC part number PER-PWR-00035). The PPC-
E10’s power input
uses a switching regulator and allows a voltage input of +12Vdc to +26Vdc.
