41
GB
3. MAIN COMPONENTS (Fig.2)
1. Accelerator lever / choke (Emak engine)
1A. Choke (B. & S. engine)
2. Ignition key switch
3. Display (only on models that are so
equipped)
4. Blade engage button
5. Cutting height adjustment lever
6. Reverse speed adjustment pedal
7. Forward speed adjustment pedal
8. Parking brake lever
9. Access to electrical system and battery
(bonnet)
10. Fuel
cap
11. Brake
pedal
12. Cutting
deck
13. Transmission
bypass
14. Grass-catcher
15. Grass-catcher emptying lever
16. Electric grass catcher operation (only
on models that are so equipped)
17. Grass catcher sensor
4. ASSEMBLY
Comply with the supplied assembly
instructions for unpacking and assembling
the tractor.
WARNING - Danger if assembly is
not carried out completely.
Do not operate the lawn tractor before it
has been fully assembled. Carry out all the
w o r k d e s c r i b e d i n t h e a s s e m b l y
instructions. If you are uncertain about
anything, ask a specialist to confirm that
the assembly has been carried out
correctly before the machine is started up.
For shipping reasons, the machine is
supplied without engine oil or fuel. Before
starting the engine, fill with oil and fuel
following the instructions given in the
engine manual.
W A R N I N G : U n p a c k i n g a n d
completing the assembly should be
done on a flat and stable surface, with
enough space for handling the machine
and its packaging, always making use of
suitable equipment.
The packaging should be disposed of in
accordance with local regulations in force.
5. COMMANDS AND CONTROL
INSTRUMENTS
The following section describes the
controls of lawn trac tors with rear
discharge. Make sure you are referring to
the appropriate description for your lawn
tractor.
The standard dashboard
The elements of the standard dashboard
(Fig. 3) are explained below.
Controlling the engine speed (3b)
CAUTION
- Remember that operating the controller
influences the speed!
For controller with integrated choke:
Moving the controller (3b) increases and
reduces the engine speed, and in the
uppermost position it switches on the
choke.
Switch on the choke: Push the
controller all the way towards the
choke symbol. Only use this position
for starting the engine.
CAUTION
- Some tractor variants have a
separate choke button (3a) on
the dashboard. This must be
pulled out as well in order to
start the tractor.
- When the engine is running,
slowly push the button back in!
Mowing: In this position, the engine
runs at maximum speed.
Idling: In this position, the engine
runs at the lowest speed.
