em@x
28
6.
The nameplate is inside the appliance or at the back.
2.2 Installation of the oven
The customer is responsible for the installation. If the manufacturer´s help is
needed to repair any damage due to improper installation, this repair work is not
covered by the guarantee. Improper installation may cause serious personal injuries
and/or property damage. The manufacturer cannot be held liable for such injuries
or damages.
Fit the appliance in the installation opening of your kitchen unit; you can install
the appliance underneath a worktop or in a suitable cupboard of your kitchen
unit. Fix the appliance by using the 2 fixing holes in the frame. You will see the
holes when opening the door of the appliance. Strictly observe the
measurements and distances for proper ventilation.
1.
Provide an opening meeting the dimensions on figure 1. Fit the appliance into
the opening.
2.
Open the door and remove the rubber caps of the two screws on the sides of
the oven-frame.
3.
Fix the oven on the kitchen cabinet with the two screws which fit the holes
provided in the oven-frame.
4.
Fix the rubber caps after fitting the oven into the cabinet.
Fig. 1
