background image

 

Nanohawk

                                          

 

 

emax-usa.com 

Disclaimer 

 

Please read the disclaimer carefully before using this product. By using this product, 
you hereby agree to this disclaimer and signify that you have read them carefully and 
completely. This product is not suitable for people under the age of 18. Adult 
supervision is highly recommended for kids under the age of 18. 

Our Nanohawk features open-source flight controller and Electronic Speed 
Controllers to meet the FPV enthusiasts' need to upgrade their quad.  

Please read the instruction manual and warnings carefully. Before every flight, make 
sure the battery is fully charged and power connections are secure. DO NOT fly 
around crowds, children, animals or objects. EMAX ACCEPTS NO LIABILITY FOR 
DAMAGE(S) OR INJURIES INCURRED DIRECTLY OR INDIRECTLY FROM THE 
USE OF THIS PRODUCT. 

Precautions 

Please follow the instructions to assemble and to operate this product in a proper 
way. 

Pilots do not use this product if you have physical or mental illness, dizziness, 
fatigued, or use while under the influence of alcohol or drugs.  

Please fly in a safe area away from people  

Do not modify or use other parts and accessories not approved for the use of EMAX. 

Do not use this product in harsh environments (such as winds, rain, lightning, snow, 
etc.). 

 Do not use this product in a strong electromagnetic environment. 

Support 

Please visit 

emax-usa.com 

or 

emaxmodel.com

 for any updates or support needs. 

 

 

Summary of Contents for Nanohawk 1S
















Reviews: