Technical Specifications
Model ...............................................................................................................
LM120P
Cutting Style ....................................................................................................
Microcut
Shred Size
..................................................................................0.17” x 0.39” (4.2 x 10mm)
Sheet Capacity
......................................................................................................12 sheets
Shred Speed Max Sheet Capacity
...................................................... 7 ft/min (2.1 m/min)
Intake Throat Width
..................................................................................... 8.78” (223mm)
Dimensions (l x w x h)
.................................... 13.7” x 10.3” x 19.1” (348 x 263 x 487mm)
Weight ...................................................................................................
19.4 lbs (8.8 kg)
Basket Capacity .............................................................................
5 gallons (18.9 liters)
Run Time (min)
.............................................................................................. 2 ON / 30 OFF
Noise Level (motor)
.....................................................................................................72 dB
12-SHEET MICROCUT
PAPER SHREDDER
How To Use Your Shredder
Setup Instructions:
1. Mount the shredder correctly to the basket.
2. Connect the power cord to any standard 120 volt AC outlet. For pluggable equipment,
the socket-outlet shall be installed near the equipment and shall be easily accessible.
3. Move switch to AUTO position.
4. Insert paper to activate.
Setup Cautions:
1. All shredders have very sharp, exposed blades on the underside. Please use care when
mounting the shredder on to the wastebasket.
2. Make sure power cord is not damaged in any way and that the outlet is properly
functioning.
3. Never attempt to shred sealed envelopes. Doing so may damage the shredder. Always
remove and unfold envelope contents completely before attempting to shred. NEVER
shred envelopes, labels or anything with glue or any sticky substance as this will lead
to paper jams.
4. It is normal for residual lubricant in the motor to burn off during the first several
extended uses of your shredder. Should you notice a slight burning odor or the
presence of small wisps of smoke during the first several extended uses, you may
continue using the shredder. If either symptom continues to occur after repeated use,
please contact technical support for assistance.
